Shindaiwa M231, Руководство владельца/оператора

Страница: 9 / 28

Handle
Connect the Handle to the Outer Tube.
1. Position the handle on the outer
tube as shown. See Figure 3.
2. Install the mounting bracket
with the socket head cap screws.
Tighten the screws finger-tight
ONLY at this time.
3. Locate the handle in the best
position for operator comfort (usu-
ally about 10 inches ahead of the
throttle assembly).
4. Secure the handle by alternately
tightening the four socket-head
screws in a diagonal or “criss-cross”
fashion.
Outer Tube
Socket-head Cap-
screws
Handle
Mounting Bracket
Throttle As-
sembly
Figure 3
8
ASSEMBLY
Assembly