Shindaiwa EB6000, Инструкция по эксплуатации

Страница: 20 / 36

20
X7508210001
© 01/2016 ECHO Inc.
OPERATION EB6000
Cruise Control
Before connecting a battery pack to the blower, always move
the cruise control lever completely forward to the stop
position. Failure to ensure that it is in the stop position could
result in accidental starting of the blower and serious injury.
Do not lock the throttle trigger in applications where the
blower may need to be suddenly stopped.
1. Squeeze the throttle trigger (D).
2. Move the cruise control lever (C) towards the rear of the
blower and into either the STOP (1), LOW (2), MEDIUM (3),
HIGH (4) or MAXIMUM (5) speed position.
3. Release throttle trigger (D) and blower will remain running at
selected speed.
4. To stop the blower, move cruise control lever (C) completely
forward (Stop position).
Note: If the cruise control feature is engaged during use and the battery pack is removed from the tool,
disengage the cruise control feature immediately.
Stopping Cordless Electric Blower
The blower continues to run for a short period after the unit is switched off.
1. Release throttle trigger (D) and move the cruise control lever
(C) completely forward (Stop position), and allow blower to
stop.
2. Push power button (A) to turn off power to unit.
Note: Power indicator LED (B) turns off when power to unit is
turned off.
If the power button does not stop the blower, remove the
battery to stop the power supply to blower. Have your
authorized Shindaiwa servicing dealer repair power button
before using blower again. If the blower does not stop when
the trigger is released and the cruise control lever is moved
completely forward (Stop position), remove the battery to
stop the power supply to blower. Have your authorized
Shindaiwa servicing dealer repair unit before using again.
When power to the unit is turned on: