Shindaiwa EB6000, Инструкция по эксплуатации

Страница: 19 / 36

EB6000 OPERATION
X7508210001
19
© 01/2016 ECHO Inc.
3. Control speed with throttle trigger (D), or for continuous use,
set speed with cruise control (C).
4. Use lower speed to blow dry leaves from walks, patios and
drives. Use rakes and brooms to loosen debris before
blowing.
5. Additional speed may be necessary to clean grass and
leaves from a lawn or flower bed.
Note: Never use a higher speed setting than necessary to
perform a task. Remember, the higher the speed, the
louder the blower noise.
6. Use the full blower pipe configuration when blowing.
7. After using blowers and other equipment, CLEAN UP!
Dispose of debris in trash receptacles.
Contacting blower pipe tip on abrasive surfaces can create sharp cutting edges and can result in
personal injury if touched. Do not scrape or drag blower pipe tip when operating or transporting
unit. Replace blower pipe assembly if protective metal ring is worn, cracked or deformed.
Starting Cordless Electric Blower
The blower will operate when the battery is installed, the
power indicator LED is lit, and the trigger and trigger or
cruise control are engaged. Make sure the blower is
properly positioned to prevent loss of control and possible
serious injury.
1. Push power button (A) once to turn on power to unit.
Note: Power indicator LED (B) illuminates when power to unit is
turned on.
2. Squeeze throttle trigger (D) to increase RPM to operating
speed.
D
C
D
B
A