Shindaiwa DGW500DM, Руководство владельца и оператора

Страница: 36 / 44

- 33 -
Fuel Filter
<Note>
•
Contact the retail outlet where the equipment was purchased if you do not have a
filter wrench.
•
Oil filter part no.: 16271-32093 (Kubota part no.)
•
After adding engine oil, operate the engine for a short period and check that there
is no oil leakage. Stop the engine when completed.
(3) Cleaning/Replacing the Air Element
Cleaning
1st time: 50th hour /
2nd time and after: Every 100 hours
Replacement Every 400 hours
1) Release the air cleaner clips and remove the
cleaner cap.
2) Clean or replace the air element.
<If dry dust is adhering>
Spray compressed air from within the element.
<If carbon or oily substance is adhering>
Replace with a new part.
3) Install in the reverse order of removal.
<Note>
•
Clean sooner than scheduled if using the equipment
in a dusty location.
•
Element part no.: R1401-42271 (Kubota part no.)
(4) Cleaning/Replacing the Fuel Filter
Cleaning
1st time: 50th hour /
2nd time and after: Every 100 hours
Replacement Every 400 hours
1) Turn the fuel lever to "CLOSE".
2) Turn the retainer ring to the left and remove the
cup and element.
3) Remove any water or foreign material from the
cup and clean the element using compressed air.
(Or replace the element.)
4) Install in the reverse order of removal.
<Note>
•
Check that no foreign material is adhering to the
packing then install the cup.
•
After installation, turn the fuel lever to "OPEN" and
check that there is no fuel leakage. After checking,
turn the fuel lever to "CLOSE".
•
Element part no.: 15521-43161 (Kubota part no.)
Side Door
Air Cleaner
Clips
Air Cleaner Element
Three Clips
Air Cleaner
Cap
Fuel Lever
Element
OPEN
CLOSE
Retainer
Ring
Cup