Shindaiwa DGW300MS/UKV, Руководство владельца и оператора

Страница: 32 / 44

- 27 -
Overview of Capacities Usable Simultaneously
Weld Output
PLUS
AC Power Output
Welding Rod / Current
3-phase Output
(Power factor: 0.8)
OR
1-phase Output
(Power factor: 1.0)
φ
2.0 / 60A
7.0 kVA 3.3 kW
φ
2.6 / 120A
7.0 kVA 3.3 kW
φ
3.2 / 140A
6.4 kVA 3.3 kW
φ
4.0 / 170A
5.2 kVA 3.3 kW
φ
5.0 / 240A
2.0 kVA 1.6 kW
φ
6.0 / 300A
0 kVA 0 kW
*1-Phase output is the total output of two receptacles.
<Note>

Do not use as an AC power source simultaneously with welding if it is necessary to
perform high-quality welding.
12. Inspection/Maintenance
Warning: Electric Shock/Injury

Always be sure to stop the engine before performing any equipment check or
maintenance.

Do not operate the equipment with any doors or covers open. There is a danger of
hair, body parts and other items being caught up in moving parts such as cooling
fans and belts.

Do not modify the equipment and do not operate with parts removed.
Warning: Fire

Always be sure to stop the engine when inspecting fuel or refueling, and absolutely
never perform such tasks near fire or other open flame. Wait until the engine has
completely cooled before inspecting fuel or refueling.

Always be sure to wipe away any spilled fuel or oil.

Absolutely never use the equipment if there is a fuel, oil or cooling water leak, and
be sure to always repair the leak before using.

Absolutely never inspect or perform maintenance to the equipment near fire or other
open flames or sparks.
Warning: Injury to Eyes and Skin

Use protective gear, such as rubber gloves, when inspecting or replacing the battery
due to the dilute sulfuric acid in the battery fluid. Be sure that fluid does not contact
eyes, or on skin or clothing.

If battery fluid gets into the eyes, or on the skin or clothing, immediately wash with a
large amount of water, and always be especially sure to seek medical attention if it
gets into the eyes.
Warning: Explosion

Do not operate the equipment or recharge the battery when the battery fluid level is
below the lower level.

Do not generate any sparks near the battery and do not allow any fire or other open
flames near the equipment because the battery generates ignitable gas.
Caution: Burn

The engine, muffler and similar parts are extremely hot during operation and
immediately after stopping the equipment. Never touch hot parts.

Never open the radiator cap during operation or immediately after stopping the
equipment. Hot cooling water and steam will spurt out.

Always be sure to stop the engine and allow it to cool before inspecting or changing
the engine oil. Opening the oil gauge or oil plug during operation will result in hot oil
spurting out.