Shindaiwa DGK7F, Руководство владельца и оператора

Страница: 16 / 48

13
(5) SPILL CONTAINMENT (Spill Containment Amount) Checking Indicator
The SPILL CONTAINMENT checking indicator illuminates if the liquid stored in the spill
containment exceeds approximately about 3.4gal. ( 13 liters ) during operation. If it
illuminates, immediately stop the engine and flush the liquid stored in the spill containment.
(
Refer to section “10. Inspection/Maintenance (9) Flushing Liquid in Spill Containment”.)
< Note >

The engine may not be stopped only if the spill containment checking Indicator illuminates during
operation.

When the spill containment checking indicator illuminates during operation, stop the engine, check
for fuel, oil and coolant leakage, and repair as necessary.

Do not use the equipment with liquid accumulated in the spill containment. Drain the spill
containment before using.
5-4. Spill Containment Overflow Warning Indicator
5-4. SPILL CONTAINMENT (Spill Containment Amount) Overflow Warning
Indicator
If the liquid stored in the spill containment exceeds
approximately about 11.4gal. ( 43 liters )
during
operation, the SPILL CONTAINMENT overflow warning
indicator illuminates, and the engine automatically stops.
In that case, open the CHECK DOOR and check inside
the SPILL CONTAINMENT whether fuel and oil leak. If
so, flush the liquid stored in the spill containment after
repairing the leaking spot.
(Refer to section
“10. Inspection/Maintenance (9)
Flushing Liquid in Spill Containment”.)
< Note >

Although the fluids that can leak internally consist of oil, fuel and coolant, the spill containment
does not have a function that can separate rainwater that has leaked into the equipment from
these internally leaked fluids. Properly dispose of liquid drained from the spill containment in a
manner according to the applicable laws and regulations.
WARNING : INJURY

Do not open the inspection door when the starter switch is in the AUTO or
START position. It may get caught in rotating parts such as cooling fans and fan
belt.

Always turn the starter switch to the STOP position and stop the engine, then
close and lock OPERATION PANEL DOOR before checking or maintaining the
engine.
CAUTION : BURNS

Do not touch the engine and surrounding components immediately after
stopping the engine as they are still extremely hot.
CAUTION : FIRE

If fuel or oil is leaking, repair the leaking location before operating.
Spill Containment Overflow
Warning Indicator