Shindaiwa DGA37CM, Руководство владельца и оператора

Страница: 46 / 56

42
Radiator Cap
Radiator Plate
Water Inlet
Radiator Cap Cover
(11) Change Coolant
Remove the radiator plate first and open
the radiator cap cover.
Remove the radiator cap.
Loosen the radiator drain cock and the drain plug on the engine side.
After draining finishes,
tighten the radiator drain
cock and the drain plug
on the engine side.
Drain the sub tank stay
and drain coolant in the sub tank.
Reinstall the sub tank and fill coolant up to FULL
level.
Fill coolant into radiator up as far as the water
inlet level.
Tighten the radiator cap.
Close the radiator cap cover and
Reinstall the radiator plate.
< Note >

Refer Coolant to
『
8-2. Checking Coolant/Water
』
.
2
3
4
5
6
7
9
1
Change 2 years or 1000 hours
8
Radiator Drain Cock
Drain Cock
Fuel Drain Coolant Drain
Sub Tank
Sub Tank Stay