Shindaiwa DG20MK-P, Руководство владельца и оператора

Страница: 32 / 48

29
E
n
g
in
e
Radiator and fins
(Clean)
Valve clearance
(Check/Adjust)
Fuel injector
(Check)
Elimination of
carbon in the
exhaust pipe line
and muffler

Oil separator filter
(Replace)
G
e
n
e
ra
to
r
Indicators, Gauges
Alarms (Check)

Operation check of
ELCB

Grounding
resistance check

Insulation tes 
O
th
e
rs
Spill containment
fluid (Check/Drain)

Spill containment
(Check/Clean)

(Clean)
(1)
Engine Oil Replacement
First Time 50 hours
Thereafter Every 200 hours
Remove the oil filler cap.
After removing the oil drain plug and packing(a rubber seal is attached),open the oil
drain faucet and drain the engine oil.
After the oil has been drained,close the oil drain faucet and reinsert the oil drain plug
with new packing(a rubber seal is attached).
Add oil through the oil filler until it is at the maximum level while checking the fuel level
using the oil level indicator.
Attach the oil filler cap.
< Note >
Refer to section “ 8-1. Checking Engine Oil ” for engine oil replacement amounts and types.
Replace the packing of the oil drain plug with new packing each time the oil is replaced.
Packing part no.: V106-000190
After reinserting the oil drain plug and shortly after starting the engine, be sure to always check
that there is no oil leakage.
Oil Level
Indicator
Oil Filler
Cap
Oil Drain plug
Packing
Oil Drain Faucet
Close
Open
Oil Drain Plug
1
2
3
4
5