background image

2

The Shindaiwa H4 series of hand-held 

power equipment  is designed and built 

to deliver superior performance and 

reliability without compromise to quality, 

comfort, safety or durability.  Shindaiwa 

engines represent the leading edge of 

high-performance  engine technology, 

delivering exceptionally high power 

with remarkably low displacement and 

weight. As an owner/operator, you’ll soon 

discover for yourself why Shindaiwa is 

simply in a class by itself!

Warning and Operational Labels

Introduction

Throughout this manual are special 

“attention statements”.

Attention Statements

WARNING!

A statement preceded by  

the triangular attention symbol and  

the word “WARNING” contains 

information that should be acted upon 

to prevent serious bodily injury.

CAUTION!

A statement preceded by the word 

“CAUTION” contains information 

that should be acted upon to prevent 

mechanical damage.

IMPORTANT!

A statement preceded by the word 

“IMPORTANT” is one that possesses 

special significance.

NOTE:

A statement preceded by the word 

“NOTE” contains information that is 

handy to know and may make your job 

easier.

 

DANGER!

A statement preceded 

by the triangular attention symbol 

and the word “DANGER” contains 

information that should be acted 

upon to prevent serious injury or 

death.

Echo, Inc. reserves the right to make 

changes to products without prior notice, 

and without obligation to make alterations 

to units previously manufactured.

IMPORTANT!

The information contained in these 

instructions describes units available at 

the time of publication. 

Contents

PAGE

PAGE

IMPORTANT!

The operational procedures described in this manual are intended to help you get the most from this unit as well as to protect 

you and others from harm. These procedures are guidelines for safe operation under most conditions, and are not intended to 

replace any safety rules and/or laws that may be in force in your area. If you have questions regarding your H4 series hand-held 

power equipment, or if you do not understand something in this manual, contact Shindaiwa at the address printed on the back of 

this Manual.

WARNING!

The engine exhaust from 

this product contains chemicals 

known to the State of California to 

cause cancer, birth defects or other 

reproductive harm.

Read and follow this operator's 

manual. Failure to do so could 

result in serious injury.

Wear eye and hearing protection 

at all times during operation of this 

unit. Wear head protection where 

there is a risk of falling objects.

Beware of thrown or richocheted 

objects

Make sure no one is within 

15 m (50 feet) of an operating 

machine.

50 FEET

(15m

)

DO NOT operate this unit 

with a blade unless the unit 

is equipped with a Shindaiwa 

approved handlebar or barrier.

Always wear a harness when 

operating this unit with a blade. 

A harness is also recommended 

when using trimmer line.

If unit is used as a brushcutter, 

beware of blade thrust. A 

jammed blade can cause the 

unit to jerk suddenly and may 

cause the operator to lose 

control of the unit.

Safety ................................................... 3

Product Description .............................. 5

Specifications

 ....................................... 5

Emission Control .................................. 6

Assembly .............................................. 6

Mixing fuel ...........................................11

Filling the fuel tank.............................. 12

Starting the Engine  ............................ 13

Stopping the Engine ........................... 14

Checking Unit Condition ..................... 14

Operation ............................................ 14

Maintenance ....................................... 17

Long Term Storage ............................. 22

Troubleshooting Guide ....................... 23

Warranty ............................................. 26

Product Registration ........................... 29

Servicing Information .......................... 32

WARNING: 

Surface can be hot. 

Always wear gloves when handling 

this unit.

Содержание C344

































Отзывы: