background image

2

The Shindaiwa 282 series is designed 

and built to deliver superior 

performance and reliability without 

compromise to quality, comfort, safety 

or durability. 
Shindaiwa engines represent the 

leading edge of high-performance  

engine technology, delivering 

exceptionally high power with 

remarkably low displacement and 

weight. As an owner/operator, you’ll 

soon discover for yourself why 

Shindaiwa is simply in a class by itself!

Warning and Operational Labels

Introduction

Throughout this manual are special “atten-

tion statements”.

Attention Statements

WARNING!

A statement preceded by  

the triangular attention symbol and  

the word “WARNING” contains infor-

mation that should be acted upon to 

prevent serious bodily injury.

CAUTION!

A statement preceded by the 

word “CAUTION” contains infor-

mation that should be acted upon 

to prevent  mechanical damage.

IMPORTANT!

A statement preceded by the word 

“IMPORTANT” is one that possesses 

special significance.

NOTE:

A statement preceded by the word 

“NOTE” contains information that is 

handy to know and may make your job 

easier.

 

DANGER!

A statement preceded by 

the triangular attention symbol and 

the word “DANGER” contains infor-

mation that should be acted upon to 

prevent serious injury or death.

Echo, Inc. reserves the right to make 

changes to products without prior 

notice, and without obligation to 

make alterations to units previously 

manufactured.

IMPORTANT!

The information contained in these 

instructions describes units available at 

the time of publication. 

Contents

PAGE

PAGE

PAGE

IMPORTANT!

The operational procedures described in this manual are intended to help you get the most from this unit as well as to protect 

you and others from harm. These procedures are guidelines for safe operation under most conditions, and are not intended to 

replace any safety rules and/or laws that may be in force in your area. If you have questions regarding your unit, or if you do 

not understand something in this manual, contact your local authorized Shindaiwa  dealer. You may also contact Shindaiwa at 

the address printed on the back of this Manual.

WARNING!

The engine exhaust from 

this product contains chemicals 

known to the State of California 

to cause cancer, birth defects or 

other reproductive harm.

Read and follow this operator's 

manual. Failure to do so could 

result in serious injury..

Wear eye and hearing protection 

at all times during operation of 

this unit. Wear head protection 

where there is a risk of falling 

objects.

Beware of thrown or 

richocheted objects

Make sure no one is 

within 15 M / 50 feet of an 

operating machine.

50 FEET

(15m

)

DO NOT 

operate this unit 

with a blade unless the unit is 

equipped with a Shindawia-

approved handlebar or barrier.

Always wear a harness when 

operating this unit with a blade. 

A harness is also recommended 

when using trimmer line.

If unit is used as a brushcutter, 

beware of blade thrust. A 

jammed blade can cause the 

unit to jerk suddenly and may 

cause the operator to lose con-

trol of the unit.

Safety .....................................................3

Product Description .............................5

Specifications ........................................5

Emission Control .................................6

Assembly ...............................................6

Mixing fuel ..........................................10

Filling the fuel tank ............................12

Starting the Engine  ...........................13

Stopping the Engine ..........................13

Checking Unit Condition...................13

Operating ............................................13

Maintenance .......................................15

Long Term Storage ............................21

Troubleshooting Guide .....................22

Warranty Statement ...........................25

WARNING ! 

Surface can 

be hot. Always wear gloves 

when handling this unit.

Содержание C282

































Отзывы: