Shindaiwa BCK-10A, Инструкция по эксплуатации

Страница: 3 / 16

3
Safety and Operation Information Labels: Make sure
all information labels are undamaged and readable.
Immediately replace damaged or missing information
labels. A new label is provided in this kit and additional
labels are available from your local authorized Shin-
daiwa dealer. Prior to installing the new label, Remove
old label and clean the outer tube with rubbing alcohol
or similar cleaner.
IMPORTANT!
Safety Labels
■
When operating with a blade, make sure the handle
is positioned to provide you with maximum protec-
tion from contacting the blade. Always make sure the
handlebar is installed in accordance with the manufac-
turers instruction.
■
NEVER use a cracked or warped blade: If a properly
installed blade vibrates, replace it with a new one and
re-check.
WARNING!
■
ALWAYS Shut off the engine immediately if a blade
binds in a cut. Push the branch or tree to ease the
bind and free the blade.
■
Beware of a coasting blade when brushcutting.
A coasting blade can injure while it continues to
spin after the throttle trigger is released or after the
engine is stopped.
General Safety Instructions
# Description Qty
1 Shoulder Strap w/ hip pad 1
2 Hanger 1
3 5mm x 12mm HSH Screw 1
4 5mm Hex Nut 1
5 Handle Bar Assembly 1
6 Caution Label 1
7 Upper Handlebar Cap 1
8 Handlebar Mounting Bracket 1
9 Lower Handlebar Cap 1
10 Hex Soc. Head Bolts, 5mm x 25mm 6
11 5mm x 45mm Bolts 4
12 Debris Shield 1
13 Debris Shield Extension 1
14 Spacer 2
15 Holder (A1) 1
16 Holder (B1) 1
17 Bolt Guard (C1) 1
18 Hex Head Bolt 7mm x 20mm w/
lock washer (D1) 1
19 Hex Head Bolt w/Flat Washer
7 mm x 24 mm (D2) 1
20 Holder/Bolt Guard (B2) 1
21 Holder (A2) (small-36 mm) 1
22 Shaft Cushion 1
23 Upper Clamp 1
24 7 mm x 26 mm Bolt (D3) 1
25 Bolt Guard (C3) 1
26 Holder (B3) 1
27 Clip 1
Assembly Tool (s)
Kit Contents
24
1
2
3
4
6
7
8
9
10
11
14
10
10 10
22
12
13
16 17
18
19
20
21
15
23
5
25
26
27