Shindaiwa BCK-10A, Инструкция по эксплуатации

Страница: 12 / 16

12
Shoulder Strap
NOTE:
Although a shoulder strap accessory is not required for use with a grass
trimmer, a shoulder strap can increase operator comfort during extended
periods of operation.
WARNING!
Always wear a shoulder strap when operating this unit with a blade. A
shoulder strap is also recommended when using trimmer line.
NOTE:
Using a shoulder strap with a brush-cutter allows you to maintain proper
control of the unit and reduces fatigue during extended operation.
Adjust the shoulder strap so the shoulder pad rests comfortably on the off-side
shoulder and the cutting path of the cutting attachment is parallel to the
ground. Tighten hanger screw.
balance and adjust unit
1. Loosen harness clamp screw.
2. Put on harness and attach unit to harness.
3. Slide harness clamp up (A) or down until unit balances with head approxi-
mately 50-75 mm (2 -3 in.) from the ground.
4. Tighten harness clamp screw.
5. Loosen Handle bar clamp screws (B), and position Handle bar for comfort-
able operation.
6. Tighten Handle bar clamp screws securely.
A
B
Install Shaft Cushion
1. Route plastic tubing alongside outer tube, and secure to tube with cushion
(A).
NOTE:
Cutout in cushion must be placed over harness hanger (B) to allow harness
hook connection.
B
A