Shindaiwa 80561 Скачать руководство пользователя страница 2

2

CAUTION!

A statement preceded by the word “CAUTION” contains 

information that should be acted upon to prevent mechanical 

damage.

IMPORTANT!

A statement preceded by the word “IMPORTANT” is one that 

possesses special significance.

NOTE:

A statement preceded by the word “NOTE” contains information 

that is handy to know and may make your job easier.

PAGE

Contents

Attention Statements ....................... 2

General Safety Instructions ............. 3

Safety Labels ................................... 3

Introduction

These are instructions to convert a grass trimmer to a blade capable unit. This is not an Owner's/Operator's manual. Infor-

mation on how to operate and maintain the unit can be found in the Owner's/Operator's manual for the unit you are convert-

ing. Note this kit is supplied with a cutting attachment shield that has been redesigned to provide better visibility and a larger 

cutting swath when used as a grass trimmer.   

IMPORTANT!

The information contained in these instructions describes 

the product available at the time of publication. 
 

Echo, Inc. reserves the right to make changes to products 

without prior notice, and without obligation to make altera-

tions to units previously manufactured.

IMPORTANT!

If the cutting attachment shield has been removed from 

your unit, or the unit was manufactured prior to October 

2001, an additional clamp kit will be required to complete 

this installation. The clamp kit required is Shindaiwa part 

number 80292.  

IMPORTANT!

The instructions described in this manual are intended to help 

you get the most from your Shindaiwa power tool as well as 

to protect you and others from harm. These procedures are 

guidelines for safe operation under most conditions, and are 

not intended to replace any safety rules and/or laws that may 

be in force in your area. If you have questions regarding your 

Shindaiwa power tool, or if you do not understand something in 

these instructions, your Shindaiwa dealer will be glad to assist 

you. You may also contact Shindaiwa at the address printed on 

the back of this instructional manual.

Attention Statements

Throughout this manual are special “attention statements”.

WARNING!

A statement preceded by the triangular attention symbol and the word “WARNING” contains information that should be 

acted upon to prevent serious bodily injury.

Read and follow this 

manual.Failure to do

so could result in

serious injury.

Wear eye and hearing

protection at all times

during the operation

of this unit.

Keep bystanders

at least 50 feet (15 m)

away during operation.

Beware of thrown or

ricocheted objects.

Do not operate this

unit with a blade.

Kit Contents ......................................6

Assembly ......................................... 8

PAGE

Содержание 80561













Отзывы: