Shindaiwa 65010, Руководство владельца/оператора

Страница: 10 / 12

10
Inspect the Gearcase Protector
The metal gearcase protector (L) is
installed to protect the gearcase flange
from damage when working close to
sidewalks or other abrasive surfaces,
and should be routinely inspected for
damage or excessive wear.
When replacing the protector, inspect to
be sure that both of the protector mount-
ing screws are firmly tightened and each
screw is locked in place with a nut as
shown.
L
D
B
C
E
Replacing the edger blade
Align the hole in holder A (A) with 1.
the matching hole in the gearcase
and then use a hex wrench to tem-
porarily lock the output shaft.
Loosen the shaft bolt then remove
2.
the output shaft bolt (C), Holder B
(B) and the edger blade (D) from
the gearcase.
Mount the edger blade and holder
3.
B (B) onto the shaft, and then
install the bolt guard (E) and shaft
bolt (turn bolt counterclockwise to
install).
Align the hole in holder A (A) with
4.
the matching hole in the gearcase,
and then use a hex wrench to tem-
porarily lock the output shaft.
Firmly tighten the shaft bolt.
5.
Remove the hex wrench.
WARNING!
Always wear gloves when
handling the edger blade.
A