- - 13 - -
Drainage operation
Drainage Operation
When running the air conditioner in COOL or DRY modes, there may be
condensation that is produced as a byproduct, especially if used in
humid or damp areas.
An internal bucket will hold the excess water from the condensation, but
once it is full the water full indicator will light up and an audible alarm will
be issued once the water level in the bucket reaches a certain level.
During this time the compressor will stop operating and the alarm will be
issued 10 times per 5 minutes until the water level goes down with the
internal dry function or once the bucket is manually drained.
Manually drain the water by moving the air conditioner to the site where
the water can be drained directly (such as the toilet or a drain), unscrew
the nut in the bottom rear of the unit and pull out the water plug. (as
shown in Fig. 14)
Drain all water in water bucket from drain outlet. (You may need to
recline the A/C back to completely drain the water from the bucket.)
Re-install the water plug and screw the nut tightly to its proper position.
Once the Bucket is drained, the water full indicator should be gone and
the unit will run normally.
Caution: When water is full, please move the air conditioner carefully and
steadily, otherwise, water may overflow from inside. The water bucket is not
enclosed and may spill if tilted or moved roughly.
Fig.14
