- 7 -
Troubleshooting
●
Is the wheel plugged in to the power source?
●
Is the power switch/breaker in the "on" position?
●
Is the power source working correctly and supplying the correct amount of electrical current?
●
Is the pedal at the "0" position (heel of the foot pedal completely down)?
●
Are there several wheels or other equipment/appliances on the same circuit?
(Check the breaker to see if the circuit has been overloaded.)
Wheelhead does not turn
●
Is the wheel resting on a solid surface and level?
●
Is there too much clay on the wheelhead?
●
Is the clay totally centered?
●
Are any of the adjustable legs loose?
Unusual sound coming from the wheel body
●
Did the wheel stop turning when clay was added to the wheelhead?
●
The wheel could be overloaded causing the built-in breaker to open, stopping the wheel.
Remove some clay. Allow the breaker to cool.
Turn on. If the breaker opens again see your authorized Shimpo dealer.
●
Did an overload cause the breaker/fuse to open at the main power source?
●
Has the power cord become unplugged?
The wheelhead stops turning
The wheelhead turns in the opposite direction
●
Allow the wheel to stop turning completely. Turn the forward/
reverse switch to the desired
direction.
●
Loosen screw nut of stopper bolt by spanner, twist stopper
bolt until wheelhead turns, then tighten screw nut again.
The wheelhead does not turn after pedal has been replaced.
●
Has the wheelhead bolt been tightened completely?
Note directions:
Forward is clockwise; Reverse is counter clockwise
screw nut
stopper bolt
Problem
Problem
Problem
Problem
Problem
Specifications
Model
Whisper-T
Motor
300W AC230V 50Hz single phase
Drive System
Direct Drive DC Brushless Motor with electric speed control
Wheelhead speed
0
～
250rpm
Speed control
Remote Foot Pedal
Wheelhead Direction
Clockwise/Counter-Clockwise
Wheelhead
Light alloy casting, diameter 300mm
Dimension
750 ×572×580mm
(
max)
Ship Weight
53kg
