- 6 -
①
Step the pedal all the way back
to stop wheelhead.
②
Turn the power switch off.
②
Set the turntable direction.
ＦＷＤ ･･･
Clock wise
ＲＥＶ ･･･
Counter clock wise
③
Step the pedal forward from the
stop position to increase speed.
Step backward to reduce
speed.
faster
Operation Starting and Stopping
Maintainance
Turn the power switch off and unplug
the power cable for cleaning, testing
or adjustment. (It is recomended to
do the same if the wheel will not be
in use for a long period.)
DO NOT POUR WATER ON THE
WHEEL TO CLEAN IT.
①
Turn the power switch on
Operation Power Switch
The power switch has two functions. One is to turn wheel
on and off. The other is a reset function. This wheel has
a safety feature for over load. In order to reset, operator
must switch off and on again. (Don't forget to step the
pedal all the way down before turning switch back on.)
Operation Switching Directions
①
Stop the wheelhead by stepping
foot pedal all way back.
②
Change the selector for opposite
direction.
Never change wheelhead direction while wheelhead is moving.
・
Start
・
Stop
stop
stop
Note: If you do not return pedal to the off position the
direction will not change even if the Fwd/Rev switch is
changed.
Note: If the pedal is not returned to the off
position before the power switch is turned
on the wheelhead will not turn; your wheel
will not respond.
Mainteinance
③
①
Operation Warning
Step the pedal all the way back
before turning the power switch off.
Do not operate any switches
with wet hand.
The wheelhead will not move if the
pedal was not all way back at last
power off.
stop
stop
①
Switch the on/off-breaker switch to
the off position (refer to diagram).
②
Return the foot pedal to the off
position (refer to diagram).
③
Turn the power switch back on.
Wipe the wheel down with a damp
sponge or cloth. (Splash pan can be
saturated if it is removed from the
wheel.)
●
Foot Pedal adjustment
Please loose pedal-adjusting nuts of the right side of
foot pedal in order to adjust pedaling weight of foot
pedal and adjust weight of pedal.
lock nut
stopper bolt
Pedal-adjusting nuts
Loose the lock nut by using the wrench and turn a
stopper bolt untill the wheelhead does start.
●
