Installation of the front derailleur
1. Adjust so that the clearance between the chain guide
outer plate and the large gear is 1 - 3 mm before installing.
2. The level section of the chain guide outer plate should
be directly above and parallel to the largest chainring.
3. Secure using a 5mm Allen key.
S
G
A
-5
3
Clearance: 1 - 3 mm
Chain guide outer plate
Chainwheel
(largest chainring)
Chain guide
Tightening torque:
5 - 7 N·m
{44 - 60 in. lbs.}
SIS adjustment
1. Low adjustment
Set so that the clearance between
the chain guide inner plate and the
chain is 0 - 0.5 mm.
2. Connection and securing of cable
While pulling the inner cable, tighten the wire fixing bolt
with a 5 mm allen key to secure the cable.
Largest
sprocket
Inner ring
Smallest
sprocket
Outer ring
Pull
Tightening torque:
5 - 7 N·m {44 - 60 in. lbs.}
After taking up the initial slack in
the cable, re-secure to the front
derailleur as shown in the
illustration.
3. Top adjustment
Set so that the clearance between
the chain guide outer plate and the
chain is 0 - 0.5 mm.
B
A
A
B
Chain guide inner plate
Chain
Low adjustment
screw
A
B
B
A
Top adjustment
screw
Chain guide inner
plate
Chain
