11
Adjustment
Adjusting the stroke on the high limit
Adjustment
Adjusting the stroke on the high limit
1.
Adjust by turning the high limit screw.
Adjust so that the center of the guide pulley is aligned with the outer face of the smallest
sprocket when viewed from the rear side.
High limit screw
Smallest sprocket
Guide pulley
High limit screw
*
RD-RX400
RD-RX810/
RD-RX812
*
Installing the chain
Refer to the dealer's manual for the chain to find instructions on installing/removing the chain.
Checking the chain length
1.
Mount the chain on the largest sprocket and the largest chainring.
Largest sprocket
Chain
Largest chainring
