Shimano DURA-ACE Di2, Руководство дилера

Страница: 17 / 54

Adjustment mode
You can adjust the gear shifting of the front derailleur and rear derailleur.
Refer to “
Gear shifting adjustment ” for the rear derailleur adjustment.
Refer to “ Adjusting the front derailleur ” in the “Front Derailleur (Di2)” dealer's manual for information on
front derailleur adjustment.
System pairing (wired)
When using the components that are already connected, the procedures in 1 , 2 , and 4 are not required.
Prepare the charged battery and the three electric wires.
Wired pairing can be performed with a spare battery.
1.
Connect the rear derailleur and dual control levers to the prepared battery.
If an electric wire is connected to the rear derailleur, replace it with the prepared electric wire.
Battery
2.
How to operate
Switching operation modes
17