38
MAINTENANCE
Replacing the brake pads
6.
Install the brake pads.
(1) Set the brake pads in the caliper.
(2) Insert the split pin.
(3) Open the tip of the split pin.
(4) Install the pad spacer (red).
Pad spacer (red)
(4)
Brake pads
(1)
(3)
(2)
Split pin
7.
Depress the brake lever a few times and make sure that the lever
operation becomes stiff.
8.
Remove the pad spacer and install the wheel.
9.
Check that the disc brake rotor does not interfere with the brake pads.
If there is interference, check if the wheel is installed correctly. If there is no problem with
the installation position of the wheel, refer to “Installing the brake caliper” and adjust
the position of the caliper.
