Installation/removal
Installing the sprocket (without chain guard)
Install the right-hand dust cap, then secure the sprocket with the snap ring.
Check the type, and note the orientation of the right-hand dust cap and sprocket when installing them.
Snap ring
Sprocket
Type A
Type B
Outward assembling
Inward assembling
Type A
Type B
Right-hand dust cap
Right-hand dust
cap C
Right-hand dust
cap B
Note the orientation of the sprocket and right-hand dust cap.
Type
Applicable sprockets
Outward assembling
Inward assembling
A
16T-23T
20T-23T
B
16T-23T
INTER-5E
24T, 27T, 30T
24T, 27T, 30T
Type A
If the sprocket is an inward assembling sprocket with 19T or fewer or for belt drive type, right-hand
dust cap A will come into contact with the chain or pulley so type B should be used instead.
Type B
If the sprocket is an inward assembling sprocket with 16T and 3 mm teeth or for belt drive type,
remove right-hand dust cap B before use.
1.
Installation/removal
Installing the sprocket (without chain guard)
17
