background image

5

CAUTION

To ensure safe riding

 

Observe the instructions in the user's manual for the 
bicycle, in order to ride safely.

Using the product safely

 

Periodically check the battery charger and adapter, 
particularly the cord, plug, and case, for any damage. If 
the charger or adapter is broken, do not use it until it has 
been repaired.

 

This appliance is not intended for use by persons 
(including children) with reduced physical, sensory or 
mental capabilities, or lack of experience and knowledge, 
unless they have been given supervision or instruction 
concerning use of the appliance by a person responsible 
for their safety.

 

Do not allow children to play near the product.

Handling the battery

 

Do not leave the battery in a place exposed to direct 
sunlight, inside a vehicle on a hot day, or other hot 
places. This may result in battery leakage.

 

If any leaked fluid gets on your skin or clothes, wash it 
off immediately with clean water. The leaked fluid may 
damage your skin.

 

Store the battery in a safe place out of the reach of 
infants and pets.

Cleaning

 

If any malfunctions or other problems occur, contact the 
place of purchase.

 

Never attempt to modify the system yourself, as it may 
cause problems with system operation.

Note

Using the product safely

 

Be sure to install caps to any connectors which are not 
being used.

 

For installation and adjustment of the product, consult a 
dealer.

 

The Product is designed to be fully waterproof to 
withstand wet weather riding conditions. However, do 
not deliberately place them into water.

 

Do not clean the bicycle in a high-pressure wash. If water 
gets into any of the components, operating problems or 
rusting may result.

 

Do not turn the bicycle upside down. The cycle computer 
or the shifting switch may get damaged.

 

Handle the product carefully, and avoid subjecting it to 
any strong shocks.

 

Although the bicycle still functions as a normal bicycle 
even when the battery is removed, the light does not 
turn on if it is connected to the electric power system. Be 
aware that using the bicycle under these conditions will 
be considered non-observance of the road traffic laws in 
Germany.

 

When charging the battery while it is mounted on the 
bicycle, be careful of the following:

 

- When charging, make sure there is no water on the 

charging port or the charger plug.

 

- Ensure that the battery is locked into the battery 

mount before charging.

 

- Do not remove the battery from the battery mount 

while charging.

 

- Do not ride with the charger mounted.

 

- Close the charging port cap when not charging.

 

- Stabilize the bicycle to ensure that it does not 

collapse during charging.

Handling the battery

 

When you carry a power-assisted bicycle in a car, remove 
the battery from the bicycle and place the bicycle on a 
stable surface in the car.

 

Before connecting the battery, make sure that there is no 
buildup of water or dirt in the connector where the 
battery will be connected.

 

The use of a genuine Shimano battery is recommended. If 
using a battery from another manufacturer, make sure to 
carefully read the instruction manual for the battery 
before use.

Disposal information for countries outside 
the European Union

This symbol is only valid within the 
European Union. Follow local regulations 
when disposing of used batteries. If you 
are not sure, consult the place of purchase 
or a bicycle dealer.

Содержание BM-E6000






































































Отзывы: