Shimadzu EI-D1003M, Инструкция по эксплуатации

Страница: 105 / 123

Appendix A COMMUNICATIONS
A-14
263-13228
A
Table A-4 Table of Timer
Table A-5 Alarm History Data Format
No. Name Range Description and format
01 Run time 00000 to 99999
Read the timer value in the “MENU MODE / INTEGRAL
TIMER / RUN TIME” on the LCD display. (Can not be
reset. Reset date is invalid.)
Example: 0
→
00000, 99999
→
99999
02
Last maintenance
time
00000 to 99999
Read the timer value in the “MENU MODE / INTEGRAL
TIMER / LAST MAINT.” on the LCD display. (Can be
reset)
Example: 0
→
00000, 99999
→
99999
03
Power failure touch-
down count
00000 to 00999
Read the timer value in the “MENU MODE / INTEGRAL
TIMER / POWER FAILURE” on the LCD display. (Can be
reset)
Example: 0
→
00000, 999
→
00999
04
High-speed touch-
down count
00000 to 00999
Read the timer value in the “MENU MODE / INTEGRAL
TIMER / MB ALARM” on the LCD display. (Can be reset)
Example: 0
→
00000, 999
→
00999
05 MB warning counter 00000 to 00999
Read the timer value in the “MENU MODE / INTEGRAL
TIMER / MB WARNING” on the LCD display. (Can be
reset)
Example: 0
→
00000, 999
→
00999
06 Maintenance call time 00000 to 99999
Read or change the timer value in the “MENU MODE /
INTEGRAL TIMER / MAINT.CALL” on the LCD display.
Example: 0
→
00000, 99999
→
99999
Item
Number
of bytes
Data Comments
1 History number 2 01 to 99 History number designated by the command.
2 Time 10 YYMMDDHHMM
Time when the failure occurred (stored as
Greenwich Mean Time)
YY: year, MM: month, DD: day,
HH: hour, MM: minutes
3 Alarm number 2 00 to 99
Alarm number of the failure that occurred. See
Table 7-6 "Table of Alarms" and Table 7-7
"Table of Warnings" in this manual for details.
4 Run status 2 NS, NA, NN
⋅⋅⋅
Run status when the failure occurred. Data is
identical to CS command answer.
5 Rotational speed 4 0000 to 0100
Speed when the failure occurred. Format is
identical to 09 in Table A-3.
6 Motor current 4 0000 to 0150
Motor current in the event of a fault. The format
is the same as No.04 in Table A-3.
7 Pump temperature 2 00 to 99
Pump temperature in the event of a fault. The
format is equivalent to the last two characters of
No.05 in Table A-3.
(Valid only for a power supply with a temperature
control function.)
8
Temperature control
function
2 00, 01, 02
Temperature control function when the failure
occurred. Format is equivalent to last 2
characters of 07 in Table A-3.