Shimadzu 503-61000-01, Руководство по установке

Страница: 85 / 208

4.32 Initial setting
Mobile DaRt Installation Manual 4-51
Tube current time product display
(The set code is displayed)
Tube current time product key (+)
(Changes set code
.)
4.32
Initial setting
Before setting initial settings, turn ON DIP switch 2-8 on the NEXSC
CPU board and turn ON the key switch. Operation described in this
section is not necessary if set values for the items below do not
need to be changed.
NOTE
Make sure to return the DIP switch to its original state after initial setting.
4.32.1 Setting of battery type
NOTE
Setting of battery type set factory-shipping.
Changing this set code need not to be done when installation.
Set code Type of Battery (Manufacturer)
0
OLD PXL12072 (Japan Storage Battery)
Manufacture date No.-000703
1 LC-P127R2 (Matsushita Battery Industry Co. Ltd.)
2 Not used
3
NEW PXL12072 (Japan Storage Battery)
Manufacture date No.-000712
4 PX12090 (Japan Storage Battery)
1.
The set code is displayed at the ones digit of the tube current time product
display.
Set the set code by using tube current time product key (+). Every time the
key (+) is pressed, the code changes one. (4 0 1 2 3 4)
2.
Keep pushing the program registration key until being displayed as "CAL
END" to register the set code.
Fig. 4-80 Setting of battery type