Shimadzu 503-61000-01, Руководство по установке

Страница: 165 / 208

E.5 Maintenance of rotary X-ray tube section
Mobile DaRt Installation Manual
E-xi
Greasing Part [B] of the X-ray tube section
The detailed drawing of Part [B] of Fig. 4 is shown in Fig. 6.
Greasing steps.
1.
Unscrew M4 flat countersunk head screw (g) and remove cover B.
2.
Unscrew four M5 hexagon socket head cap screws (h), and remove the
X-ray tube from the holding frame.
3.
Put the X-ray tube removed from the holding frame on a table or the like.
(Use a cushion under the tube.)
4.
Unscrew locking nut (i), disc spring (j), and M5 hexagon socket head cap
screw (k), and remove bearing B. In this state, bearing B and X-ray tube
can be separated each other.
5.
Grease Part
①
.
Fig. 6 Detail of Part B
Before removing the X-ray tube (approximetly 13 kg), grasp the detail of
the fixing structure. Be careful not to drop the tube by loosening other
bolts incautiously. Dropping the tube may cause the break of the tube
and injury.
カバーB
軸受けB
ロック
ナット
サラバネ
1
(h)
(k)
(g)
(i)
(j)
Cover B
Bearing B
Locking
Nut (i)
disc
spring (j)
CAUTION