SD16A Instruction Manual
6. Instruction for each screen
6-1. Screen sequences
1-4
1-1
0-0
1-0
1-17
1-18
1-19
1-20
1-21
1-22
1-23
1-24
1-2
1-3
1-5
1-6
1-7
1-8
1-9
1-10
1-11
1-12
1-13
1-14
1-15
1-16
0-1
0-2
0-3
0-4
0-5
0-6
0-0
1-0
to
Basic screen
to
1-0 screen
Basic screen
Model name
Input type
Measuring range
lower-limit value
Measuring range
higher-limit value
PV filter
Alarm 2
latching release
Alarm 1
latching release
Alarm 1
setting value
Alarm 2
setting value
PV bias
lower-limit value
higher-limit value
Communication
mode
Communication
protocol
Communication
address
Communication
data format
Communication
speed
Communication
delay
Communication
start character
Communication
BCC operation
Alarm 1
code
Alarm 1
hysterisis
Alarm 1
inhibit
Alarm 2
code
Alarm 2
hysterisis
Alarm 2
inhibit
Mode 0
Screen Group
Mode 1
Screen Group
Power ON
Screen Group
For approx. two secs
Key lock
Display
update cycle
Measuring range
Decimal places
Input unit
decimal places
Screens always displayed.
Screens displayed or not displayed
depending on some conditions.
Screens displayed when any option is added.
Each screen is classified by the screen frame as follows.
Key operations on screens of Power ON Screen Group
No key operation is required as screens alter automatically
within Power ON Screen Group.
Key operations on screens of Mode 0 Screen Group
Mode 0 Screen Group consists of screens that are often used under
control operation. The commonly-used key operations are as follows:
Shifting a display screen to the next display screen
Shifting a display screen to the setting screen
Returning from a setting screen to the display screen
Shifting from 0-0 screen to 1-0 screen
approx. 2 secs.
Key operations on screens of Mode 1 Screen Group
Mode 1 Screen Group consists of screens that are used less often
than Mode 0 screens, and are required according to the input type or
controllability. The commonly-used key operations are as follows:
Shifting a display screen to the next display screen
Shifting a display screen to the setting screen
Returning from a setting screen to the display screen
Returning from any display screen of Mode 1
to 1-0 screen
Returning from 1-0 screen to 0-0 screen
Auto return feature
If no key operation is executed on any screen but the Basic screen
(0-0) for three minutes or more, the screen returns to
the Basic screen automatically.
approx. 2 secs.
or
4
