Press and hold the
ON/
HOLD
footswitch:
●
While changing the
BANK
switch position to select a patch bank (each bank holds 3 patches):
○
UP:
the Blue bank.
○
MIDDLE:
the Red bank.
○
DOWN:
the Magenta bank.
For a detailed description of the banks, see the “
” section.
●
While changing the
BEAT
switch position to select the bypass mode:
○
UP:
“No tails” mode.
○
MIDDLE:
“Tails” mode.
○
DOWN:
“Kill Dry with tails” mode.
For a detailed description of the modes, see the “
” section.
Press and hold the
TAP/ALT
footswitch:
●
While changing the
TYPE
switch position to select one of the three global modes:
○
TP
: tap tempo mode. LFO rate is controlled by the RATE knob or the TAP footswitch.
○
RS
:
the RATE knob controls LFO rate; LFO phase is reset to zero with every press of the TAP
footswitch.
○
EX
:
expression pedal simulation mode. LFO MAIN is turned off and the movement across the
frequency range is controlled by ATTACK and RELEASE times. In this mode, the BASE knob sets the
minimum value of the virtual expression pedal, while the maximum value is controlled by the DEPTH
knob. The envelope is triggered upon pressing the TAP footswitch. Press and hold the TAP footswitch
to enter the envelope’s hold stage.
●
While turning the
TAP SCALE
knob to scale the tempo set by the TAP footswitch, which operates in the 0.2 –
2s range. In tap tempo mode, scaling the tempo this way lets you access tempos that are inconvenient to tap
in. The available division/multiplication range is 2x to 32x. Turn the knob CCW to slow the LFO rate down
(divide) or CW to speed it up (multiply).
●
While turning the
STEREO
knob to control stereo width. The knob’s main function is to offset LFO phase in
one of the channels. Offset depth varies from patch to patch, depending on the initial settings. The higher the
setting, the wider the stereo field.
●
While turning the
DETUNE
knob to control the depth of gradual wet signal detuning in Detune Mode
(accessed by pressing and holding the HOLD (ON) footswitch).
●
While turning the
ATTACK
knob to set attack time in EX mode.
●
While turning the
RELEASE
knob to set release time in EX mode.
●
While changing the
BANK
switch position to access the patches in the Cyan bank. For a detailed description
of the banks, see the “Banks & Patches” section.
In TP (tap tempo) mode, the LED over the TAP/ALT footswitch glows magenta when you press and hold the footswitch.
It indicates that secondary functions of the controls are being accessed.
Tweaking the secondary control functions (underlined in this text) will have no effect on the primary control function
values (printed in
bold
in this text), and vice versa.
The primary and secondary functions are independent from each other, but only the latest one you’ve tweaked will
have a physical representation (because they are controlled by the same knob or switch).
Содержание Prism II
Страница 1: ...Prism II Stereo Filter Pad User Guide ...
