Shibaura FT450-A, Руководство пользователя, Страница: 29 / 44

26
5. Periodical inspections
(2) Handling of Shibaura full-automatic charger
A) Unpacking
Take out the charger from the
box.
○
Remove packaging materials from the charger when charging with it.

If not, a fire may be caused.
B) Place of installation
○
Install the charger at a dry and well ventilated place where the battery does
not get well.

If not, electric shock or fire may result.
C) Battery Charger Operating Manual
①
Turn off every current consumer which
is connected to the Battery and Pump.
②
Make sure power switch on the Battery
Charger is OFF.
③
Plug the connector of Battery Charger
into AC 220V outlet.
④
Plug the Battery Charger cord into the
pump socket.
⑤
Turn on the power of the Battery Charger.
POWER LED (RED) will turn on, and will start charging
automatically.
⑥
CHARGE UP LED (GREEN) will turn on if the battery has reached
more than 80 percent charge level.
Once the battery has reached full charge, it will maintain the battery
at full charge (GREEN LED).
⑦
To stop charging battery, turn off the power before unplugging the
connector and cord.
Warning
Caution