Sherwood R-977, Руководство по эксплуатации, Страница: 61 / 84

OSD Menu Settings
61
5
Move the cursor to “FINISH” by pressing the
CURSOR RIGHT(  ) button, and then press the
ENTER button.
• The new name is stored in the memory.
SURROUND
TEST
DISPLAY
SETUP
DIMMER
ENTER
HOME MENU DISC MENU
RETURN DISPLAY
PURE
AUDIO
MONITOR
SELECT AUDIO SUBTITLE
STEREO
SURROUND
TEST
DISPLAY
SETUP
DIMMER
ENTER
HOME MENU DISC MENU
RETURN DISPLAY
PURE
AUDIO
MONITOR
SELECT AUDIO SUBTITLE
STEREO
Note
• To cancel the Re-Name operation, move the cursor to
“CANCEL” by pressing the CURSOR LEFT(  ) button,
and then press the ENTER button.
HDMI Assign

You should assign the connected HDMI INs if it is
different with the default settings. You can select
among HDMI 1 to 4 and FRONT. For details, see
“Connecting Video Components” on pages 14 ~ 17.

You can select the desired HDMI IN from HDMI 1
~ HDMI 5, and F.HDMI.
Note
• In such a case that a HDMI IN is assigned to two input
sources or more and when these input sources are
selected, the uncompressed digital video signals (and
digital audio signals when the HDMI Audio Output
is set to “ON“) input into the same HDMI IN can be
output from the HDMI MONITOR OUT of this receiver.
Component Assign
 You should assign the connected COMPONENT
VIDEO INs if it is different with the default
settings. You can select desired COMPONENT
VIDEO IN from Component 1 ~ 2. For details, see
“Connecting Video Components” on pages 14 ~ 17.
Note
• In such a case that a COMPONENT VIDEO IN is
assigned to two input sources or more and when
these input sources are selected, the component video
signals can be viewed from the same COMPONENT
VIDEO IN.
Digital Audio Assign

You should assign the connected DIGITAL INs if
it is different with the default settings. You can
select the desired DIGITAL IN from Optical 1 ~ 2
and Coaxial 1 ~ 2. For details, see “Connecting
Audio Components” on pages 18 ~ 19.
Note
• In such a case that a DIGITAL IN is assigned to two
input sources or more and when these input sources
are selected, the digital audio signals can be heard from
the same DIGITAL IN.
Video Mode
Depending on the Video Mode settings, the video
input signal can be converted and output from the
HDMI MONITOR OUT.
Menu item Description
Auto
When there are multiple video
input signals, the video input
signals are detected and the
video input signal to be output
from the HDMI MONITOR OUT
is selected automatically in the
priority order of them: “HDMI” >
“COMPONENT” > “(composite)
VIDEO”
HDMI
The signal that is input into the
HDMI IN connector is always
played. The HDMI video input
signal is output from the HDMI
MONITOR OUT only.
Component
The signals that are input into
the COMPONENT IN jacks are
always played. The component
video signals are converted and
output from the HDMI MONITOR
OUT.
Composite
The signal that is input into the
(composite) VIDEO IN jack is
always played. The composite
video signal is converted and
output from the HDMI MONITOR
OUT.
Note
• “Component” video input cannot deliver 1080p signals.