Sherwood R-977, Руководство по эксплуатации, Страница: 33 / 84

Operations
33
Adjusting the current channel level
After adjusting each channel level with test tone,
adjust the channel levels according to the program
sources or to suit your tastes.
1
Press the CHANNEL LEVEL button.
• The memory mode (“CAL”, etc.) is displayed on
the fluorescent display for several seconds.
• If the memory mode or channel level
disappears, press the button again to restart the
function.
POWER ON STANDBY
REMOTE SELECT
TV AVR BD SAT
TUNE TUNE
MUTE
T/V
PRESET PRESET
M2 M3 M1
MACRO SLEEP
CH
CH
VOLUME CH.LEVEL
INPUT
VOLUME ROOM2
2
Select the desired channel by pressing the
CURSOR UP(

)/DOWN(

) buttons.
• Each time the buttons are pressed, the
corresponding channel is as follows:
REF 1/2 (or CAL)

FRNT L [

F.H L]

CENTER [

F.H R]

FRNT R

SURR R
 (BACK R  BACK L)  SURR L 
SUB W <  DD/DTS>
( ) : Possible when the surround back channel is
set to “2ch” or “1ch”.
[ ] : Possible only when the front height speaker is
not set to “NO”.
<> : Possible only when the digital signals from
Dolby Digital DTS Dolby TrueHD or DTS-HD
program sources that include LFE signal are
input.
Front Left Front Height Left
Front Height Right Front Right
Subwoofer
Surround Left
Surround Right
Surr.Back Right Surr.Back Left
SURROUND
TEST
DISPLAY
SETUP
DIMMER
ENTER
HOME MENU DISC MENU
RETURN DISPLAY
PURE
AUDIO
MONITOR
SELECT AUDIO SUBTITLE
STEREO
Note
• Depending on the speaker settings (“NO”, etc.)
and surround mode, etc., some channels cannot be
selected.
3
Adjust the level of the selected channel as
desired by pressing the CURSOR LEFT(  )/
RIGHT(

) buttons.
•
The LFE level can be adjusted within the range
of -10 ~ 0 dB and other channel levels within
the range of -15 ~ +15 dB.
• In general, we recommend the LFE level to be
adjusted to 0 dB. (However, the recommended
LFE level for some early DTS software is -10
dB.) If the recommended levels seem too high,
lower the setting as necessary.
TUNER BD/BDR STB/CBL
SURROUND
TEST
DISPLAY
SETUP
DIMMER
ENTER
HOME MENU DISC MENU
RETURN DISPLAY
PURE
AUDIO
MONITOR
SELECT AUDIO SUBTITLE
STEREO
DVD/DVR
4
Repeat the steps 2 and 3 to adjust each channel
level.
Note
• These adjusted levels are just memorized into user’s
memory (“CAL”), not into preset memory (“REF 1”,
“REF 2”).