Sherman TIG 202P, Руководство пользователя

Страница: 6 / 13

6
DCEP DCEN
7.2 TIG method
The clamp's current clamp should be connected to the socket with negative polarization (8), the control plug of the clamp should be placed in the socket
(6), and the gas connection plug in the socket of the quick-coupling (7). The gas pipe from the regulator should be connected and attached to the gas
connector (16) located on the back of the housing. Connect the positive pole of the source (5) with the workpiece using a cable with a clamp. Connect
the device's plug to a 230V 50Hz power socket.