Sherman TIG 202P, Руководство пользователя

Страница: 10 / 13

10
- altitude up to 1000m
You k and the consumable parts of the TIG T- torch 26: You k and the consumable parts of the TIG T- torch 26: You k and the consumable parts of the TIG T- torch 26: You k and the consumable parts of the TIG T- torch 26:
lp
Name
1 Tungsten electrode 1 Tungsten electrode
2 T-26 collet
2 T-26 collet
3 T-26 current connector
3 T-26 current connector
4 T-26 gas nozzle
4 T-26 gas nozzle
A full list of consumable parts and spare parts is available on the website www.tecweld.pl and at TECWELD. You can buy these parts
directly.
12. MAINTENANCE INSTRUCTIONS
As part of daily service, keep the welding machine clean, check the condition of external connections and the condition of electric wires and cables.
Replace consumable parts regularly.
Periodically clean the inside of the device by blowing it with compressed air to remove dust and metal filings from the control boards as well as wires and
electrical connections. A general inspection and condition of the electrical connections should be carried out at least once every six months, in particular:
- the state of electric shock protection
- isolation status
- security system status
- proper functioning of the cooling system
Damage resulting from operating the welding machine in improper conditions and failure to comply with maintenance instructions are not
covered by warranty repairs.
13. STORAGE AND TRANSPORT INSTRUCTIONS
The device should be stored at a temperature of –10 ° C to + 40 ° C and relative humidity up to 80% free of corrosive fumes and dust. Packaged
equipment should be transported using covered means of transport. During transport, the packed device must be secured against slipping and secured
in a proper position.
14. SET SPECIFICATION
1. Source TIG 202P
1 piece.
2. TIG welding torch
1 piece.
3 . Ground cable with a clamp 3 . Ground cable with a clamp 3 . Ground cable with a clamp
1 piece.
4. Cable with electrode holder
1 piece.
4. Operating instructions
1 piece.
5. Packaging
1 piece.