6
5. PREPARING TO WORK EQUIPMENT
When storing or transporting the unit under freezing, before operating the device to bring the temperature above freezing.
1. Power MIG
2. Nest "-"
3. Plug polarity changes
4. Spool control plug holder Gun
5. Slot "+"
6. Power Cord
7. The gas connection
8. The power switch
5.1 Wiring
5.1.1 Method MMA
Welding the wire ends to terminals (2) and (5) located on the front panel so that the electrode holder was appropriate for the electrode pole. The polarity
of the wiring depends on the type of welding electrodes used and is given on the electrode packaging. The return line clamp must be carefully mounted
on the welded material. Plug the device into a power outlet 230V 50Hz.
