3
Poisoning prevention fumes and gases evolved at the time of cutting:
•
Keep your head outside the smoke,
•
Use ventilation and exhaust installed in limited air exchange.
•
Blow fresh air when working in a confined space (tanks)
•
Use masks and respirators.
Preventing burns:
•
Wear suitable protective clothing and footwear to protect from burns from arc radiation and spatter,
•
Avoid contamination of clothing lubricants and oils that may lead to its inflammation
Explosion prevention and fire:
•
Do not operate the machine and cutting in areas at risk of explosion or fire,
•
The position of the cut should be equipped with fire-fighting equipment,
•
The position of the cut should be at a safe distance from flammable materials.
Preventing negative effects of noise:
•
Wear earplugs or other protection against noise,
•
Warn people about the danger nearby.
WARNING!
Do not use the power source for thawing frozen pipes.
Before starting the unit:
•
Check the condition of electrical and mechanical connections. It is forbidden to use handles and load wires with damaged insulation.
Inadequate insulation handles and cables current danger of electric shock,
•
Ensure proper operating conditions, ie. To ensure proper temperature, moisture and ventilation in the workplace. Outdoors closed to protect from
rain,
•
Place the cutter in place enabling its easy handling. Persons operating cutter should:
•
know and comply with health and safety regulations in force in the performance of plasma cutting,
•
use proper, specialized protective equipment: gloves, apron, rubber boots, shield or welding helmet with a suitably selected filter
•
know the contents of this manual cutter and operated in accordance with its intended purpose. Repair work may only be carried out
after removing the plug from the wall socket.
When the device is connected to a network is not allowed to touch the bare hand or by wet boat depends also any elements constituting the electric
circuit section.
It is forbidden to remove the outer casing when the device is turned on to the network. All processing of cutting their own are prohibited and may
constitute a deterioration in security conditions.
All maintenance and repair may only be performed by authorized persons with the conditions applicable to the safety of electrical equipment. Do not
operate the cutter in explosive or fire! The position of the cut should be equipped with fire-fighting equipment. After working the machine power cord
must be disconnected from the network.
The above risks and the general safety rules is not exhaustive safety while driving cuts because it does not take into account the specifics of the
workplace. They are an important complement to bench safety instructions and training and briefings given by supervisory staff.
3. GENERAL DESCRIPTION
Cutter CUTTER 90 CUTTER 110 serve to air plasma sheets of steel and aluminum and copper. These devices are inverters produced the most
technologically advanced components made in IGBT technology.
Application of inverter resulted in a significant reduction in the dimensions and weight of the equipment, which enables them to operate in particularly
difficult to access.
The construction and front panels for CUTTER CUTTER 90 and 110 are identical devices differ only in the parameters and brackets to be cut.
