SHERCO 125 SE-R 2017, Руководство по ремонту

Страница: 35 / 49

35
ENGINE REASSEMBLY
❱❘
Main transmission and clutch
- Lubricate the connecting rod assembly gasket.
- Install the half-moon wedge in its housing.
-
- Insert the pinion with the shoulder in a
downward position onto the crankshaft shank.
-
- Insert the washer [1], housing spacer and pre-
lubricated needle cage [2] on the main shaft.
-
- Raise the clutch housing and its washer [3].
- Place the blue brake fluid on the main shaft
threading.
- Assemble the clutch drum and its nut on the
main shaft in applying red brake fluid and a new
safety washer.
- Introduce tool reference 1814 and tighten the
nut to 100 N-m.
- Apply blue brake fluid on the crankshaft
threading.
- Raise both the tapered washer and the nut.
- Block the main transmission using tool 1814
and then tighten the pinion nut at the end of the
crankshaft to 100 N-m in adding red brake fluid.
- Remove tool 1814 and verify the absence of any
hard point in the main transmission by turning
the connecting rod assembly.
1
2
3