SHERCO 125 SE-R 2017, Руководство по ремонту

Страница: 34 / 49

125 SE-
R
34
I
I
ENGINE REASSEMBLY
❱❘ Selection mechanism
- Place the spring into the casing with the curved
strand pointing upwards.
- Insert the spacer, the locking finger and the
washer, then coat the CHC M6 x 20 screw with
blue brake fluid and assemble all the parts.
- Hook the spring to the lever arm. The other end
of the spring must lean against the casing [1].
- Install the selection star indexation slug on the
drum.
- Pull the locking lever arm backward in order to
install the selection star.
- Coat the screw with blue brake fluid and then
assemble the selection star on the drum [2].
- Lubricate the axis of the now assembled
selection and insert it into the needle bearings
without neglecting the set ring.
- When the prong abuts the selection star, push it
so that the shaft drops all the way to the bottom
[3].
- Verify whether the return spring strands are
positioned against the finger in the casing on
both sides [4].
- Install the selector and shift through all the
speeds. Upon shifting through the entire range
of speeds, the transmission gearbox shaft
output needs to be rotated. Remove the selector
once again.
1
2
3
4