Orange Pi Manual
Copy right by Shenzhen Xunlong Software Co., Ltd
www.orangepi.org
www.xunlong.tv
21
2)
Details of Booting Steps
a. Insert the TF card with written image in to the TF card slot.
b. You could use HDMI cable to connect your Orange Pi to HDMI TV
or monitor.
You could also use AV interface and audio interface to connect output
video and audio to analog TV or display.
c. There is 13pin on board which you could connect to expansion board.
For expansion board, 2USB ports, mic and IR receiver are available.
d. It is the network module on board, which you can access Orange Pi
to the wired network.
e. You could connect to a power adapter on mic USB OTG with a
power adapter up to or bigger than 5V/2A. Avoid using smaller
power GSM mobile phone charger, it is not able to output 2A even if
it marked "5V/2A ".
Note: Micro-USB
（
OTG
）
cannot use as power input which may cause the fail
boot of the OrangePi. Only the power interface could input power.
The Orange Pi will boot in a few minutes If the above steps are
successful. There will be graphical interface in he monitor. It may take a
