Orange Pi Manual
Copy right by Shenzhen Xunlong Software Co., Ltd
www.orangepi.org
www.xunlong.tv
16
iv After the image is written, click "
close
" button
5) Write Android image into EMMC
Steps for writing image into EMMC is almost the same with writing into
TF card.
a. Download corresponding Android image and Phoenix Card writing tool.
b. Formatting SD card.
c. Make sure the Disk is same as TF card, and start formatting SD card.
d. Write Android into TF card, please note the red mark, which is different
from writing into TF card.
After written image with Card production, then exit.
e. Power it on, you could found that the red LED on board is flashing
which means the image is writing. When the LED is off, image written
finished. Take off the TF card, then power the board on, it should run.
6) Write Linux image into EMMC
