Product Introduction
PIR is a passive infrared detector or physical sensor, the sensor doesn’t emit any energy but only
passively receive and detect infrared radiation from outside. Under room temperature, all items
have radiation. Human beings are warm-blooded animal with stable infrared radiation, are most
easily to be detected. That’s why we also call it body sensor. PIR send messages via Z-wave
network to the Z-Wave main controller. In the Z-Wave network communications, PIR can be
connected to any Z-wave main controller,Different countries or areas, the radio frequency is
different of the Z-wave network. In the communication between the PIR and Z-wave main
controller, PIR can only send messages, not be able to receive messages. When the PIR is
triggered, PIR will send message to the Z-wave main controller, and associate devices to work
through the Z-Wave main controller. The PIR is battery powered, is small and can be installed
easily.
Technical Parameters
Power supply: CR123A x 1
Standby current: 15uA
Battery life: 7 years
Radio Protocol: Z-wave
Radio Frequency:
908.42
MHz
Detection range: 7 meters
Viewing angle: 90 degree
Operation temper: 0-40
℃
Storage temperature: 0-60
℃
Size (D x W x H): 45mm x 45mm x 48mm
Technical Information
Use passive IR sensor to detect what is moving.
When the PIR is triggered, LED light flashes in the detection area.
Easily install with screws or sticker on the wall or the table.
When there are people or animal that is moving in the PIR detection area, PIR
will send alarm messages to the Z-wave main controller.
Compatible with any Z-Wave main controller.
