Shenzhen MG630 cutting plotter, Руководство пользователя

Страница: 4 / 21

4 / 21
4 / 21
3. Installation
3.1 Machine Installation and connections
3.1.1 Place the cutter in a plane and roomy place
3.1.2 Connect the cutting plotter to computer by USB cable or serial cable , or Put U disc
directly to the cutter:.
3.1.3 Check power and voltage, whether it is grounded, do not connect to power until all are in
good condition
WARNING
Make sure machine is grounded, otherwise electric shock
or mechanic default is possibly resulted in.
Don’t use the power source not meeting rating voltage
using the wrong power source may result in fire or
electric shock.
Don’t pull out the plug when
the power is on to avoid
damage to the machine.
Place the machine on a stable
surface, otherwise the
machine may fall therefore
get damaged.