Shenzhen MG630 cutting plotter, Руководство пользователя

Страница: 21 / 21

21 / 21
21 / 21
and impressive. To resolve it replace it with a new knife.
6.16 Question: what is attentive when cutting big characters?
Answer: (1). When cutting big characters, the system can automatically How to setup page,
you can cut a big character in several pages, but it is notable that the setting of
output width shall be conformed
to the width of instant-glue in addition, when cutting big characters and output it,
you should
widen pages or set seaming distance.
(2). When you use the special wide machine to cut the big characters, especially the
long big characters Before cutting input, you shall instead the paper first look careful
the paper if the paper deviates then deviate the big characters into some pouts to input,
it can make sure it won’t deviate and waste paper.
6.17 Question: how do we maintain the plotter?
Answer: MK series plotter all employ upscale oil bearing, no oil is needed even it works for a
long time. After operation everyday, clean the dust with soft brush. The glue
remaining in engine base can be cleaned with alcohol. If frequently operated in dusty
environment above two years, please have maintenance technicians clean the dust in
machine. If plotting precision degrades, the maintenance of running parts are
desirable (firming and replacing the abraded parts).
6.18 Question: Why does the plotter is out of our control sometimes?
Answer: Maybe while transporting or using it, the signal line is improperly connected, open
the machine properly plug all lines. If the problem still fails to be solved after the
above operation, please contact local agent or maintenance center.
6.19 Question: Why does the plotter come to halt?
Answer: Because it encounters vibrate for a long period, or has been used for a long period,
or is affected by temperature, so dielectric displacement happen to the servo
driving board, therefore resulting in halt, please contact local agent or customer
maintenance center.