Operation instruction
4
Panel Description
Transmitter Panel
1)
Debug port:
for firmware update
(See default set for update)
2)
LED Indicators:
A.
Power–The PWR LED indicates that power is available to the unit.
B.
Mode–The FW LED indicates that firmware has been loaded and the system is
running.
C.
Link–The LINK LED indicates that an HDBaseT link connection has been
established between the two boards over the Cat5e cable.
D.
HDCP
a.
When the HDCP LED is on, it indicates that video content with HDCP protection is
being transferred.
b.
When the HDCP LED is blinking, it indicates that video content without HDCP
protection is being transferred.
c.
When the HDCP LED is off, it indicates that no video is being transferred.
