CHD603B-U Desktop EM card reader User Manual
-2-
CHD603B-U is a high-performance EM card induction reader which has standard USB
communication interface and with ESD electrostatic protection function, it use for reading EM
card, mainly use for smart card system especially for background of the card issuer, the
characteristics of the reader is that have good appearance, quick response, long distance
reading, stable performance, easy for use, needless external power supply, installation of
wiring simple and solid, the reader adopt of a USB virtual serial, and user system software can
be used directly without changes.
With the traditional serial COM slowly from the historical stage, many new computers
(especially laptops) 90% do not provide serial COM, only USB ports, development of the new
product CHD603B-U card reader are very suitable for such needs and a USB interface to meet
the traditional use of the computer.
1.
Performance parameters
※
Dimensions: 110 mm (length) X 27mm (width) X 79 (high) mm (± 2MM);
※
Weight: 81 ± 2% g;
※
Color: black;
※
Interface standards: match with the USB 2.0 standard, USB virtual serial port;
※
Power: USB interface supply, without an external power supply;
※
Frequency: 125 KHZ ± 5%;
※
Support card type: all kinds of EM card (include thick EM cards, thin EM cards etc.);
※
Reading card response rate: less than 0.1 seconds;
※
Reading card Distance: 5 to 10 cm (Depend on the quality of the card);
※
Communication rate: 9600 bps
※
Working environment: temperature of -10
℃
~ 55
℃
, relative humidity of 5% to 95%, 100%
moisture-resistant board;
※
Storage environment: temperature of -20
℃
~ 70
℃
, relative humidity of 5% to 95%;
※
State Display: When the reader get power by USB there has blue light, and once reading
card, there has red light and a beep;
※
Internal zero delay automatic conversion transceiver technology to ensure that it meets all
the software;
※
Distribution of virtual COM USB drivers, support hot-swappable, plug-and-play;
2
、
USB virtual COM driver installation:
Virtual COM driver allows the PC to the application form as an increase in COM port
(independent of any existing hardware COM port) use.
Installation steps are as follows:
The first step: find the attached CD and take into the computer, click the Setup.exe in the
CD-ROM, such as picture 1, click "Install" button and proceed, once the installation is
complete, there has a message as picture 2:
Picture 1
