Website: www.jvecctv.com/www.viptyty.com
Company Name: Shenzhen Mingnanhuitai Tech.Co.,Ltd Tel: 86-0755-89505873
starting the camera again next time, the time will be reset.
Attention
: Before setting time, push the Power on/off button to the
“on” side then
press the Mode switch button to power off. Because to the
“off” side, the device is no
power completely and still need to reset the time next time.
Used as Web camera
Insert the user manual CD into computer, find and install the web camera driver
SPCA1528 PC Driver.exe, then connect the camera via USB cable to computer under
power-on mode. At this time, it can be used as web camera. Connect the camera to
the computer via Usb cable under power on or power off mode, it
„ s used as U disk,
press the Mode swtich button to web camera mode.
Attention
1) There are three occations to power off automatically
If it
‟ s low electricity while recording, the device will save the data at first then
power off automatically.
When SD card is full, the indicator light blinks quickly, and save the date at first
then power off automatically
If no operation within 45 seconds under any standby mode, the device will power
offf automatically.
2) When taking video continually, the system will automatically generate a new
video file after each operation.
3) Make sure insert the SD card into the slot before use, if no card, the device will
power off antomatically in 15 seconds. If no card before power on, it
‟s easy to go
dead.
4) Connect to computer: the time for computer with different system or configuration
to identify the hardware is slightly different. During this period, please wait for a
moment. If computer
can‟t identify, please make sure your operating system,
drivers and USB interface cable in good work order, then connect again.
5) Under a bright environment, keep camera vertical, stable and keep certain
distance from the scene you want to record in order to achieve a best effect .
6) As the device has built-in high-capacity polymer lithium battery, so it has a
memory effect .We advise in the first 5 times of usage, charge the battery fully
after the battery is out of use, so that the battery can work with its max working
hours perfectly.
