Website: www.jvecctv.com/www.viptyty.com
Company Name: Shenzhen Mingnanhuitai Tech.Co.,Ltd Tel: 86-0755-89505873
a certain mode directly after power on, just press the Mode switch several times as
you like. But should pause 2-3 seconds between two modes.
Attention
: If it
‟s working under a certain mode, you‟ d better save the file at first by
press the Fuction button. Then press the Mode switch button. Because if you press
the Mode switch button directly under working mode, there is no time to save the file.
witch off
Push power on/off button to the
“off” side under any mode, all lights turn off and
the device will stop working.
Press the Mode switch button for several seconds under any standby mode to
power off.
Attention
: Under any mode, the file cannot be saved if push power on/off button to
the
“off” side directly.
Reset
Under incorrect operation or a certain reason, the device may stop working, at this
time, need to reset the device
Push the power on/ off button to the
“off” side directly
Dismount the battery directly to reset the device
Attention: Please try to invoid to dismount the battery, because it will decrease the
life-span of the device. If you need to change the battery, should be under
power-off mode.
Charging
If it is low electricity, charge the device using the charger. The green light of the
charger keeps on while being charged. The green light trurns off when it is fully
charged.
Playback video
Connect the camera to computer via USB cable and play back video on computer.
Please make sure there is playback software in the computer before connecting.
Setting time
When using the device for the first time, you can reset the time as follows:
According to the format:
The first line:
[date]
the second line :
2009/12/12
the third line:12:12:12
Edit the file named
“TAG. txt”, then copy it to the root of the disk of the camera. When
