Hongdian Corporation
5
H9380 Android IPC CLI User Manual
Unrecognized command
The input command was not found
Did not find the input command keyword
The command type entered in the command is
incorrect
Commands entered in the command length
exceeds the specified range
Command incomplete
Enter the command is not complete (usually not
enter the child times the error)
Too many parameters
A command parameter exceeds the system limit
There
is
no
matched
command.
No matching command found
1.4 Login CLI
Step 1
Connect PC with router by Ethernet cable, and configure the PC IP is in the same segment
with Hongdian IPC whose default IP is 192.168.8.1.
Figure 1-1
Step 2
Run Telnet client on PC, input IPC's IP.
