Shenzhen Hongdian Technologies H8922, Руководство пользователя

Страница: 108 / 157

Doc. Version 1.0
99
H8922 3G/4G Router User Manual
The protocol code of the local protocol port and the remote protocol port must be the same, indicating that
one protocol is encrypted. When the local protocol port and the remote protocol port are configured, IPSec
encrypts the protocol and port, and other communications are not encrypted. When this parameter is not con-
figured, it means that IPSec encrypts all communications.
3.
Match phase parameter configuration. See below:
Figure 5-60 The matching phase configuration page
set the matching phase parameters of the IPSec rule. After the configuration is complete,
click “Save”.
When the encrypted interface selects br0 and the br0 interface has multiple addresses, the address selected by
IPSec is the IP1 address of br0.
Table 5-41 describes the parameters of the matching phase of the IPSec rule.
Table 5-38 The parameters of the matching phase of the IPSec rule.
Parameter Details Operation
Basic Settings
Select
Set the phase type of IPSec, including the first
phase, the second phase, and the third phase.
Radio button selection.
The rule added here is the matching
phase, so select "IPSec".
Interface
Name The name of this stage is mainly used for the
matching of the third stage. A maximum of 12-bit strings are al-
lowed.
Fill in the name of the stage. Cannot
be modified after saving
Match Phase1 To select a matching name of “phase1” Select from Dropdown List.
Select the policy name for the first