Shenzhen Hongdian Technologies H7960, Руководство пользователя

Страница: 86 / 148

Hongdian Corporation
79
H792x 3G/4G Router User Manual
Parameter Details Option
Rule Name QoS rule name The max to 12 characters
Only set when adds a new
rule and the follow-up can
not be modified
The rule name can not be
repeated, otherwise the rule
will be covered after the rule
is added in front of the cover
Control
Interface The interface type of QOS, include:

br0
：
QOS interface is LAN
 modem
：
QOS interface is modem
Dropdown List
Network The network address that flow in
and out via the QOS interface, is the
object of speed limit. Full in destination address
and subnet mask
Manual input
Format1: A.B.C.D/Mask
Port The network interface of QOS Value area: 1-65535
You can not configure the
port, if not the configuration
represents all ports
Rate Transmission rate of the network
address settings
Value area
：
1
～
65535
Units
：
Kbps
Ceil Rate In ensuring the basic rate and the
spare bandwidth, the maximum
bandwidth of the network address
of the communication can be
obtained with higher priority will be
given priority redundant bandwidth
Value area
：
1
～
65535
Units
：
Kbps
Priority Set the precedence of the rules
Value area
：
[1,30]
Step 4 Single click “save” icon to QOS setting.
QoS is mainl y used to alloca te the a vera ge bandwidth for the users whi ch a ccess Internet through the
router, or assigned specifi c users wi th more bandwidth. If the router is connected wi th two subnets :
192.168.8.1/24 and 192.168.9.1/24, the router QOS can control the ra te of these two subnets; If the
router's bandwidth is relati vel y well-off, the router can adjus t the bandwidth based on pri ori ty and
redundancy of two subnets, tha t is, the router meets the high priori ty redundancy bandwidth fi rs tl y, then
meets the low priori ty subnet redundancy bandwidth.
---END