Shenzhen Hongdian Technologies H792x, Руководство пользователя

Страница: 114 / 129

7 FAQ H792x 3G/4G Router
7 -80 (2014-05-28)
Table 5-41 Routing table Parameter instruction
Parameter Details Operation
Static route
Network IP address the router can reach
Subnet Mask IP network the router can reach. It is used together
with “Network”
Gateway Next hop IP address which the router will reach
interface Interface from router to gateway
metric Route No which the router reaches destination IP
Policy route
Priority Priority the router select route
---END
5.9 RESET button function
“RESET” button is on the rear panel and next to power interface. This button can be used
when the router is in use or when the router is turned on. Three are 3 functions to press
“RESET” button when the router is in use:
 Press “RESET” for about 2 seconds, router will reboot.

Press “RESET” 5-10 seconds, the router will reboot, meanwhile, the router will be resumed
to default factory setting configuration.

Press “RESET” over 20 seconds, the router will reboot, and get into CFE upgrading. The
router is resumed to default factory setting configuration.
Press button when the router is turned on:

Press “RESET” button and turn on the router, and keep pressing “RESET” for 2 seconds. The
router will get into CFE upgrading mode.
---END